ETABS

ETABS Course Overview

 

ETABS expands as Extended3D Analysis of Building System. ETABS is a structural analysis and design software developed by Computers and Structures, Inc. (CSI). ETABS is an Engineering software application that is highly used for multi-storied building structural analysis as well as structural design. Dynamic Cad offers the best classroom training for Civil 3D through which students understand the surfaces, lay out parcels, and design geometry by including the making of horizontal alignments and vertical profile, and many more.

ETABS has powerful CAD-like drawing tools available with an integrated system, which enhances its ability to handle the largest and even the complex building models and configurations. Dynamic Cad provides the best coaching classes to its students in the field of CAD, CAM & CAE. And, while taking the software training for Etabs, students get motivated to do Internship and also gets an opportunity to go for industrial visits as well.

During the Etabs training, students get many benefits like student panel, study materials, e-books, tutorials, and projects which gives them a better understanding of the concepts of software and also help them to grow in their career. Dynamic Cad students get an option to transfer themselves to any of our CAD Franchise centres in India, even if they have been registered at Dynamic Cad Jaipur or at any other CAD centre. After the course completion, student not just only get the Etabs certificate but also gets placement assistance through which they can be placed in any of the companies all over India.

Course Contents

 

ETABS

 
  • Introduction to ETABS
  • Introduction to Structure Design
  • Drawing Tools
  • Select Commands
  • CAD Import
  • Composite Columns
  • Wall Modeling
  • Shear Wall Design and Optimization
  • Steel Connection Design
  • Programming ETABS using the OAPI
  • Occupancy Loads using Shell Uniform Load Sets
  • Creating Reports
  • Buckling Factors
  • Time History Plots due to Walking Excitation
  • Composite Beam Design
  • Sequential Construction
  • Section Cuts
  • Synthetic Earthquake Generation
  • Performance-Based Design
  • Response Spectrum Analysis
  • Vertical Displacements in Tall Buildings
  • Reinforced Concrete Slab Design
  • Automated Post Tensioning of Slabs
  • Accidental Torsion
  • Visualization Tools

Features & Capabilities

 
  • 25 Buses (AC & DC) Capability
  • Project Saving
  • New & Existing Project Access
  • Reports with Student Watermarks
  • ETAP Base Module
  • Cable Ampacity – ANSI & IEC
  • Panel Studies & Single-Phase Systems
  • Wind Turbine Generator & PV Array
  • HVDC Transmission Link
  • NetPM™ – Network Project Management

Analysis Modules

 
  • Load Flow
  • Short Circuit – ANSI & IEC
  • Unbalanced Load Flow
  • Optimal Power Flow
  • Voltage Stability
  • Transient Stability
  • Harmonic Analysis
  • Reliability Assessment
  • Star™ – Protective Device Coordination

How will you get your certificate?

 

Dynamic Cad is a pioneer in CAD/CAM/CAE training and most of the industries give great recognition to its certificate throughout India and abroad. Dynamic Cad Certificates are ISO verified which makes it highly reputed comparing to the other local brands and helps the student get prioritize while going for job opportunities in the industry. Dynamic Cad Software Training is conducted by highly knowledgeable trainers which help students to enhance their skill set by putting great emphasizes on project-based learning.

Call for Advice now : +91 79047 47793

How Our instructors are certified

 

CAD DESK is a pioneer in CAD/CAM/CAE training and most of the industries give great recognition to its certificate throughout India and abroad. CAD DESK Certificates are ISO verified which makes it highly reputed comparing to the other local brands and helps the student get prioritize while going for job opportunities in the industry. CAD DESK Software Training is conducted by highly knowledgeable trainers which help students to enhance their skill set by putting great emphasizes on project-based learning.

CNC Programming Training in Chennai

ETABS (70Hrs) 35Days

 

INTRODUCTION TO ETAB

  • Basic Process , Template and Defaults
  • ETabsinterface, MenuBar, Tool Bar
    Model Explorer
  • Display Title Tab(Active)&Display Title Tab(Inactive)
  • Status Bar, Drawing and Selection, Current units
  • Coordinate system&Comparison of Coordinate system
Create the Basic Grid System
  • Grid Dimensions (Plan)
  • Custom Grid Dimension(Plan)
  • Story Dimensions – Define Story Data
  • Custom Story Dimensions – Define Story Data
  • Add Structural Object with Prismatic Property
  • Types of Support
    • Fixed Support
    • Pinned Support
    • Roller Support
  • Load Cases
    • Self-weight
    • Uniform Member Load(UDL)
  • Analysis
  • Verification of Result
    • Bending Moment
    • Shear
    • Seeing the Values

Basic Modes

  • Select Mode, Select, Deselect, Invert Selection

Draw Mode, Drawing Tools, Mouse Pointers

  • Draw Joint Objects
  • Draw Beam/Column/Brace Objects
  • Draw Beam/Column/Brace (Plan, Elevation, 3D)
  • Quick Draw Beams/Columns (Plan,
    Elevation, 3D)
  • Quick Draw Columns (Plan)
  • Quick Draw Secondary Beams (Plan)
  • Quick Draw Braces (Elevation)
  • UDL for a specific distance
  • Point Load
  • Result verification in deflection and torsion in secondary Beam

Draw Floor/Wall Objects

  • Draw Floor/Wall (Plan, Elevation, 3D)
  • Draw Rectangular Floor/Wall (Plan, Elevation)
  • Quick Draw Floor/Wall (Plan, Elevation )
  • Draw Walls (Plan)&Quick
  • Draw Walls (Plan)
  • Draw Wall Openings (Plan, Elevation, 3D)
  • Assign of floor load for dead and live load
  • Yield line pattern and load distribution
  • Basic Calculation of dead and live load
  • Code References&Dimension Lines
  • Reference Points&Reference Planes
  • Section Cut
  • Developed Elevation Definition for wind
  • Wall Stacks (Plan, Elevation, 3D)
  • Auto Draw Cladding
  • Snap Options

Calculation

  • Calculation of Dead Load
  • Live load calculation
  • Select a command from the Select menu

Mouse Pointers

  • Normal Select Pointer
  • Alternate Select pointer
  • Edit Story and Grid System
    Tower
  • Define Properties
  • Material Properties
  • Frame Sections, SlabSection,
  • DeckSection, Wall Section
  • Auto Select Section List

Add Structural Objects Manually

  • Draw Columns, DrawBeams, Draw Secondary (Infill) Beams ,Draw the Floor
  • Draw Walls&Draw Wall Stacks
  • Add Structural Objects Using Templates
  • Auto Draw Cladding

Select Structural Objects

  • Selecting, Graphical Selection, Selecting by Coordinates
  • Select Command and Deselect Command
  • Invert Selection Command
  • Get Previous Selection Command
  • Clear Selection Command
  • Assign/Change Properties
  • Assign the AUTOLATBM Auto
  • Select Section List
  • Make an Assignment using
  • Check the Sections in an Auto Select
  • Frame auto Meshing
  • Frame Floor Meshing
  • Floor Auto Mesh
  • Wall Auto Mesh

Edit the Model Geometry

  • Edit Stories, Edit Tower
  • Replicate
  • Edit Frame ,Divide Frame, join Frame
  • Reverse Frame Connectivity
  • Edit Shell, DivideShell, MergeShell, Shrink/Expand Shell

For Viewing

  • Set 3d View
  • Set Elevation View
  • Set Building Limits
  • Zooming Option
  • Set grid System Visibility
  • Make selected object Visibility
  • Invert object Visibility
  • Show all object

Use full Commands

  • Arrange Window
  • Show Bounding Plane
  • Animation Sounds
  • Save User Defaults Setting
  • Customized Tools Bar

Load the Structural Model

  • Structural Primary Loads
  • Dead Load ,Live Load
  • Define the Load Patterns
  • Auto Lateral Load
  • Seismic Load Wind Load
  • Self-Weight Multiplier
  • Modify an Existing Load Pattern&Delete an Existing Load Pattern
  • Define Shell Uniform Load Sets
  • Assign Structural Loads

Define Load Cases

  • Review/Create Load Cases
  • Define an Auto Construction
  • Sequence Case
  • Load Combination
  • Shell Uniform Load Sets
  • Diaphragms, Group Definition and Section Cuts

Analyze the Model

  • Check the Model , Set the Mesh Options
  • Model Analysis&Model Alive Feature
  • Set Load Case to Run
  • Locking and Unlocking the Model

Result Verification

  • Bending Moment Diagram
  • Shear Force Diagram and Deflection &Torsion

Design

  • Concrete Frame Design
  • View Preference
  • Interactive Design
  • Design Display Ratio
  • Verify analysis vs Design Section
  • Verify All Member Passed
  • Steel Frame Design
  • Preference
  • Interactive Design
  • Auto Selection List (By default
  • Program Calculate Economical and
  • Safe Member For Section)
  • Composite Beam Design&composite Column Design
  • Shear Wall Design

Display Results

  • Obtain Basic Graphical Displays
  • Graphical Displays using Model Explorer
  • Tabular Display of Results

Detailing

  • Detailing Process
  • Rebar Selection Rules
  • Start Detailing, Edit Views
  • Create and Manage Drawing Sheets

Generate Results

  • Summary Report

Project Submission